Percent Weighing; Establishing A Reference Weight - Uline OHAUS RANGER 7000 Manual Del Usuario

PERCENT WEIGHING

Use Percent Weighing to measure the weight of a
sample displayed as a percentage of a pre-established
Reference Weight.
Press the button until Percent is displayed in
the upper left portion of the home screen. Establish a
reference weight (see Establishing a Reference Weight
below) and then place the objects on the pan to check
the percentage. The default (or last) reference weight is
displayed.
THE PERCENT HOME SCREEN
NOTE: Press the
explanation.

ESTABLISHING A REFERENCE WEIGHT

There are three ways to establish a reference weight:
1. Key in the reference weight value using the
alphanumeric keypad and then press the button
corresponding to the
Figure 44
2. Press the button corresponding to the
enter the Edit Reference Weight screen. (See Figure 45)
Figure 45
PAGE 17 OF 105
OPERATION CONTINUED
Main Display Line
Reference Fields
Functions
button for button icon
i
icon. (See Figure 44)
icon to
The Edit Reference Weight screen is now displayed.
Enter the desired value using the alphanumeric
keypad and then press the button corresponding to
the icon to save and return to the Application
home screen.
3. Place the reference weight on the pan and press
the button corresponding to the
Application Setup
The Application can be customized for various user
preferences. Press the button corresponding to the
icon to enter Configuration. (See FIgure 46)
Figure 46
The Configuration Menu is now displayed. (See Figure 47)
Figure 47
Select the list item and press the button corresponding
to to change the setting as desired. To return
to the Application home screen, press the button
corresponding to
The Percent Configurations are defined below (defaults
in bold).
ITEM AVAILABLE SETTINGS
Auto Tare On, Off
Chain Tare On, Off
Accumulate Off, Automatic, Manual
icon.
.
COMMENTS
To enable Automatic Tare
To enable Chain Tare
(Continuous Tare)
To enter Accumulation/
Totalization
0721 IH-7991