Uline OHAUS RANGER 7000 Manual Del Usuario página 9

Place 10 pieces of sample on the pan and press the
button corresponding to the
sampling with default reference size.
NOTE: The reference size can be changed in
the counting configuration.
B. Negative Sampling
1. Place container of samples on the pan and tare
the scale; NET 0 will be displayed. Remove samples
from container; a negative net reading will be
displayed. Input the sample size and press the
button corresponding to the
will be displayed on screen.
2. Alternatively, press the button corresponding to the
icon. A numeric input screen appears. Key in
the desired number of pieces and press the button
corresponding to the
3. Display returns to the home screen. (See Figure 16)
Figure 16
Sampling can also be performed by pressing the button
corresponding to the
C. Entering a Known APW
1. Key in the Piece Weight and press the button corresponding
to the icon to confirm and store the APW.
2. Alternatively, press the button corresponding to the
icon. A numeric input screen appears.
3. Key in the Piece Weight using the keypad, then press
the button corresponding to the
Display returns to the home screen with new APW value
displayed in the reference field. (See Figure 17)
Figure 17
NOTE: When unit is metric (g, kg), APW unit is g.
When unit is imperial (lb, oz), APW unit is lb.
PAGE 9 OF 105
OPERATION CONTINUED
icon to perform
icon. The value
icon.
icon with preset reference size.
icon.
Application Setup
The Application can be customized for various user
preferences. Press the button corresponding to the
icon to enter Configuration. (See Figure 18)
Figure 18
Configuration screen is now displayed. (See Figure 19)
Figure 19
Select the list item and press the button corresponding to
the icon to change setting. To return to Application
home screen, press the button corresponding to
The Counting Configurations are defined below
(defaults in bold).
AVAILABLE
ITEM
SETTINGS
Auto Tare On, Off
Chain Tare On, Off
Off, Automatic,
Accumulate
Manual
Auto Opt.* On, Off
APW Auto Save* On, Off
Opt. Beep On, Off
Internal
On, Off
Resolution
Smart
On, Off
Sampling
Reference Size 1...10...999
* If APW value is directly entered (not through sampling) or calculated
from the reference balance [displayed as APW(B)], this feature does
not work.
.
FUNCTION
Turns Automatic Tare on/off
To enable/disable Chain
(continuous) Tare
To enable/disable
Accumulation/Totalization
To enable/disable Automatic
Optimization of APW
To enable/disable APW
Automatic save
To enable/disable
Optimization Beep
To enable/disable internal
counting resolution
To enable/disable Smart
Sampling
Set reference size
0721 IH-7991