Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Application Setup
The application can be customized for various user
preferences. Press the button corresponding to the
icon to enter configuration.
The configuration screen is now displayed. (See FIgure 8)
Figure 8
Select the list item and press the button corresponding
to the
icon to change the setting. To return
to the Application home screen, press the button
corresponding to
The weighing configurations are defined below (defaults
in bold):
ITEM
AVAILABLE SETTINGS
Auto Tare
On, Off
Chain Tare
On, Off
Accumulate
Off, Automatic, Manual
Statistics
On, Off
Accumulation
To start Accumulate weighing data, place the item on
the pan and press the button corresponding to the
icon. (See Figure 9)
Figure 9
The top accumulation icon will start blinking. The load
to be accumulated has to be >= 5d and the next
accumulation can only start once the pan has been
cleared.
NOTE: The accumulation icon
be shown if accumulate is set to manual.
(See Application Setup above)
PAGE 7 OF 105
OPERATION CONTINUED
.
COMMENTS
To enable Automatic Tare
To enable Chain
(Continuous) Tare
To enable Accumulation/
Totalization
To enable statistics
will only
Viewing the Statistics results
When Statistics is set to ON, press the info button
view the statistics results.
Viewing the Accumulation results
To view accumulation results, press the info button
then press the button corresponding to the
Accumulate Result screen is displayed. (See Figure 10)
Figure 10
NOTE: To return to home screen press the
button. Press the
i
accumulation result.
Clearing the Statistic/Accumulation Results
To clear statistic/accumulation results, press
A warning message appears. (See Figure 11) Press the
button corresponding to the
deletion or press the button corresponding to the
icon to abort deletion and return to previous screen.
Figure 11
NOTE: Accumulate/statistic information clears
automatically when selecting a new library.
Input/Output (I/O) Setup
The I/O's can be customized for various user preferences.
The I/O's are defined below (defaults in bold).
ITEM
Discrete Input 1
Off, Zero Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input 2
Off, Zero Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output 1 Off, Overload, Underload
Discrete Output
Off, Overload, Underload
2
Discrete Output
Off, Overload, Underload
3
Discrete Output
Off, Overload, Underload
4
icon.
button to print
CLR
.
+/-
icon to confirm the
AVAILABLE SETTINGS
0721 IH-7991
to
i
i
Publicidad
Tabla de contenido
