Uline OHAUS RANGER 7000 Manual Del Usuario página 32

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SERIAL COMMUNICATION AND COMPUTER/PRINTER SETUP CONTINUED
USB HOST
The USB Host can be used to connect a barcode scanner and USB flash drive to the scale.
PRINTOUT FORMAT
Printout string for g, kg, lb, oz units:
CHECK WEIGHING APPLICATION
WEIGHT
FIELD
(RIGHT ALIGNED)
Length
11
NON-CHECK WEIGHING APPLICATION
FIELD
(RIGHT ALIGNED)
Length
Each field is followed by a single delimiting space (ASCII: 32).
DEFINITIONS:
Weight – Up to 11 characters, right justified – at immediate left of most significant character (if negative).
Unit – Up to 5 characters, right justified – if the unit in the Print Content menu was set to off, the unit will be removed in
the weight string and replaced by spaces.
Stability – "?" character is printed if not stable. If weight is stable, a space is printed.
T/N/G/PT – "T" is printed for a tare weight, "N" printed if weight is net weight, "G" or nothing printed if weight is a gross
weight, "PT" is printed if the tare weight is Preset Tare.
Application Status (for Check) – Fixed to six characters. Display status like "Under", "Accept" and "Over" for check weighing.
Terminating Character(s) – terminating character(s) printed depending on FEED menu setting.
PRINTOUT STRING FOR THE LB:OZ UNIT
FIELD
WEIGHT1 SPACE UNIT1 SPACE WEIGHT2 SPACE UNIT2 SPACE STABILITY SPACE G/N SPACE MESSAGE
Length
4
1
• The printout string has a fixed length of 28 characters.
• Each Space field is a delimiting space used to separate the other fields.
• The Weight1 field is four right justified characters. If the value is negative, the "–" character is located at the
immediate left of the most significant digit.
• The Unit1 field is two left justified characters.
• The Weight2 field is seven right justified characters.
• The Unit2 field is two left justified characters.
• The Stability field is one character. A space is printed if weight value is stable. A "?" is printed if weight value is not
stable.
• The G/N field is one character. "G" is printed for a gross weight. "N" is printed for a net weight.
• The Message field is five left justified characters.
NOTE: The Termination Characters Carriage Return and Line Feed are appended to the printout.
PAGE 32 OF 105
UNIT
SPACE
SPACE
(RIGHT ALIGNED)
1
5
WEIGHT
SPACE
(RIGHT ALIGNED)
11
1
2
1
7
STABILITY
SPACE
(?)
1
1
1
UNIT
STABILITY
SPACE
(?)
5
1
1
1
2
1
T/N/G/PT
APPLICATION STATUS
(RIGHT
SPACE
ALIGNED)
2
1
T/N/G/PT
SPACE
(RIGHT
ALIGNED)
1
2
1
1
1
1
TERM.
(RIGHT ALIGNED)
6
2
TERM.
2
TERM.
CHAR(S)
5
2
0721 IH-7991

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

H-7991H-7992H-7993H-7994H-7995

Tabla de contenido