Uline OHAUS RANGER 7000 Manual Del Usuario página 23

Application Setup
The Application can be customized for various user
preferences.
Press the button corresponding to the
enter Configuration. (See Figure 70)
Figure 70
The Configuration Menu is now displayed. (See Figure 71)
Figure 71
Select the list item and press the button corresponding
to to change the setting as desired. To return
to the Application home screen, press the button
corresponding to
The Differential Configurations are defined below
(defaults in bold).
ITEM AVAILABLE SETTINGS
Auto Tare Off, On
Chain Tare On, Off
DIFFERENTIAL OPERATION
To start differential, please follow the instructions below.
Press the button corresponding to the
enter Edit Item. (See Figure 72)
Figure 72
PAGE 23 OF 105
OPERATION CONTINUED
icon to
.
COMMENTS
To Set the Automatic Tare
To Set the Chain Tare
icon to
The Edit Item Menu is now displayed. (See Figure 73)
Figure 73
Press to add a new item. A maximum of 20 items
can be created.
Press , the current item is selected and the scale
returns to the main screen to start differential weighing.
Press to edit the name of the item.
NOTE: All data will automatically be cleared
when scale is powered off. An item must be
selected to start differential operation.
SIEVE WEIGHING
Sieve analysis (or gradation test) is a practice or
procedure used to assess the particle size distribution
(also called gradation) of a granular material. It can
be performed on any type of non-organic or organic
granular materials including sands, crushed rock and
aggregates, clays, granite, feldspars, asphalt, concrete,
coal, soil, as well as a wide range of manufactured
powders, grain and seeds.
Press the button until Sieve is displayed in the
upper left portion of the home screen.
THE SIEVE HOME SCREEN
NOTE: Press the
explanation.
Main Display Line
Reference Fields
Functions
button for button icon
i
0721 IH-7991