Changing Password - Roger Technology B70/2B Instrucciones Y Advertencias Para El Instalador

View manoeuvre counter
The number consists of the values of the parameters from
N.B.
Manoeuvres performed.
View manoeuvre hour counter
The number consists of the values of the parameters from
N.B.
Manoeuvre hours.
View control unit days on counter
The number consists of the values of the parameters from
N.B.
Days with unit switched on.
Password
Setting a password prevents unauthorised persons from accessing the settings.
With password protection active ( =
Only a single password is used to control access to the door automation system.
WARNING: Contact the Technical Support Service if you lose your password.
Password activation procedure:
• Enter the desired values for parameters
• Use the UP
• Press and hold the
•
• Switch the control unit off and on again. Check that password protection is activated ( = ).
Temporary unlock procedure:
• Enter the password.
• Check that
Password cancellation procedure:
• Enter the password ( = ).
• Save the values
• Use the UP
• Press and hold the + and - buttons for 4 seconds.
•
and
• Switch the control unit off and on again ( = ).

Changing password

Protection deactivated.
Protection activated.
62
x100 = 12300 manoeuvres.
= 123 hours.
= 123 days.
buttons to view the parameter
= .
=
buttons to view the parameter
indicate that no password is set).
to multiplied by 100.
to .
to .
and .
.
.