Publicidad
Idiomas disponibles
Idiomas disponibles
II.10.6 SFS accessory - Soft starter
The SFS accessory is used to reduce the start-up current peak, thereby achieving a soft and gradual start, with a noticeable benefit in terms of wear of the
electric motor.
The graph shows a quality related example of the starting mode of the ADVANCE unit (1+i) with and without the Soft-Starter accessory. The
inrush current values with the SFS accessory are indicated in tables "A" Technical data.
Inrush
Inrush
II.10.7 LDK accessory - Leak Detector
The LDK accessory allows you to detect any refrigerant gas leaks.
If a refrigerant leak is detected, two different options are available:
1 - Management of a voltage-free contact (for the user):
o OPEN CONTACT -> Alarm triggered
o CLOSED CONTACT -> No alarm triggered
2 - Management, in addition to the voltage-free contact, of a default logic selected by the user on the control panel (see the Commands and controls
manual for its configuration) which allows the unit to perform the following actions:
o triggering of an ALARM
o shutdown of the unit with PUMP DOWN
o shutdown and restart of unit with PUMP DOWN
EQPI3X
Inrush current - without SFS
Time [s]
Inrush current - with SFS
Time [s]
I (max)
I (max)
EN
51
Publicidad
