Publicidad
Idiomas disponibles
Idiomas disponibles
INOXPAN S.L. Pando
P RST IGNITION
Settings for the first ignition
Warm-up mode:
Temperature
Weather
Setting the time
(Before using the oven, the time must be set).
1. After switching the oven on electrically, touch the clock symbol
and then you can set the time in hours using the slider or the "+/-"
symbol.
2. Touch the clock symbol again
using the slider or the "+/-" symbol.
3. Touch the clock symbol
NOTE: The clock has a 24-hour display.
.
250 ℃
1 h
Once the oven has cooled down:
1. Clean the smooth surfaces and the door with
soapy water and a tea towel.
2. Dry all surfaces
3. Install the side grilles
to adjust the time in minutes
to finalise the setting.
16
EN
PHB-861
PHTV-862
Publicidad
