Publicidad
Idiomas disponibles
Idiomas disponibles
INOXPAN S.L. Pando
EN
Rapid preheating
You can use fast preheating to shorten the preheating time of a function.
When you select a function, touch the quick warm-up symbol ,
and the quick warm-up
mark on the display will light up.
NOTE: If this function cannot preheat quickly, a beep will be heard.
Change during cooking
During the operation period of the appliance, you can change the cooking type and
temperature by using the oven function or the slider control. After the change, if there is no
further action after 6 seconds, the oven will heat up according to what you have changed.
If you want to change the cooking time during the cooking process, touch
and change it
using the slider or the [ +/- ] symbol. After the change, if there is no further action after 6
seconds, the oven will operate at what you have changed it to.
If you want to cancel the cooking process cooking process, touch.
NOTE: Changing the mode/temperature/resting time may negatively influence the cooking
result, so we strongly advise you not to do so unless you are very experienced in cooking.
CAUTION!
During operation the oven becomes very hot, especially inside the oven cavity. Once the oven
has been switched off, NEVER touch the interior surfaces of the oven or the heating elements.
Use oven gloves when removing accessories or utensils from the cavity and allow the oven
to cool down. Keep children at a safe distance to avoid burns.
23
Publicidad
