Descargar Imprimir esta página

Pando PHB-861 Manual De Uso página 244

Ocultar thumbs Ver también para PHB-861:

Publicidad

Idiomas disponibles

Idiomas disponibles

INOXPAN S.L. Pando
Timer
You can use the timer function by touching . When the time comes, the oven
will beep to remind you. At the first touch of , set the timer by hours, then touch again and
set the timer by minutes. Touch
You can set the timer before and during the cooking process.
Function lock and power on
Your oven is fitted with a safety lock so that it cannot be switched on or any settings changed
accidentally.
A long press for 3 seconds activates the lock. A further long press of 3 seconds unlocks the
oven again.
You can activate and deactivate the locking function when the oven is in operation or not.
You can activate and deactivate the locking function by long pressing the symbol for 3
seconds.
When the lock is activated, a will appear in the status bar.
DEMO - Demonstration mode
(Special function for exhibitions)
When the demonstration mode is activated, the switch-off and switch-on are still active but
the heating elements do not work.
1. In standby mode, press and hold the "
off".
2. Slide the slider to the right to open the demo mode and display "ON = on"; slide the slider
to the left to close the demo mode and display "OFF = off".
NOTE: You can press the Cancel button to exit the setting, or wait 3 seconds to automatically
exit the demo mode setting state and return to the standby state.
again and the adjustment is complete.
" key to enter demo mode and display "OFF =
35
EN
PHP-864

Publicidad

loading

Este manual también es adecuado para:

Phtv-862Php-864