Publicidad
Idiomas disponibles
Idiomas disponibles
INOXPAN S.L. Pando
Maximum operating time
The maximum operating time of this oven is 9 hours, to avoid forgetting to turn it off
Change of lamp
WARNING!
LAMP REPLACEMENT MUST BE CARRIED OUT BY A PANDO SERVICE SPECIALIST. IF ANY
DAMAGE IS CAUSED DURING THIS PROCESS BY AN UNAUTHORISED USER OR UNAUTHORISED
PERSONNEL, IT WILL NOT BE COVERED BY THE WARRANTY, EVEN IF IT IS STILL VALID!
RISK OF ELECTRIC SHOCK!
When replacing the lamp, the lamp holder contacts are active. Before replacing the lamp,
unplug the oven from the mains or switch off another circuit breaker in the fuse box.
RISK OF BURNS!
The oven becomes very hot. Never touch the interior surfaces of the oven or the heating
elements. Always allow the oven to cool down and keep children at a safe distance.
1. Place a towel in the cold cavity to prevent damage.
2. Turn the glass cover counterclockwise to remove it (corner lamp). Pull the side grille
outwards, then pry it slightly with a flat-headed tool to remove the glass cover (side lamp).
3. Pull the lamp, do not turn it.
4. Refit the glass cover.
5. Remove the towel and switch on the circuit breaker to see if the lamp lights.
6. In the case of the side lamp, if it works well after having replaced it, remember to replace
the side grille.
If the lamp in the cavity fails, it must be replaced. Heat-resistant halogen lamps with 25 watts
and 230 V are available from the after-sales service or specialist dealers.
When handling the halogen lamp, use a dry cloth. This will increase the life of the lamp.
55
EN
PHB-861
PHTV-862
PHP-864
.
Publicidad
