Publicidad
Idiomas disponibles
Idiomas disponibles
INOXPAN S.L. Pando
Steam cleaning function
This function uses steam to soften scale inside the cavity, making it easier to clean.
1. Turn on the system, push and pull out the water box. Inject 1000ml of fresh water into
the water box.
2. Push the water tank into the right place in the oven.
3. In standby mode, press the "A" button several times until the display shows "A11", which
means that the oven enters the steam cleaning function. The time area shows the default
time "05:00min".
4. Press "
" to start the programme.
NOTES: Steam cleaning time cannot be adjusted. Press the pause button or open the door to
stop the cleaning process. Close the door and press the start button to restart the cleaning
process.
Automatic descaling function
For best results in cleaning and descaling the steamer, we recommend using detergent with
sodium citrate. Follow the manufacturer's instructions indicated on the packaging. It is
suggested to use the descaling function after the steam function has been running for 20
hours.
1. Remove the water tank and fill it with 1000ml of water.
2. Put the water tank in place.
3. In standby mode, press the "
Button several times until the display shows "A10", which means that the oven enters
the automatic descaling function. "min" and the default time "40:00" are illuminated,
the tank icon shows the current water level (water, no water, full of water), the other
icons disappear.
4. Press "
" to start the
5. When the remaining time is 10:00, the programme stops and reminds about the lack of
water. Take out the water tank and pour out the water. Clean the water tank
thoroughly.
6. Change water, repeat steps 3 and 4.
" button several times until the display shows "A10".
programme.
30
EN
PHTV-862
Publicidad
