Publicidad
Idiomas disponibles
Idiomas disponibles
INOXPAN S.L. Pando
FIRST IGNITION
Settings for the first ignition
Warm-up mode:
Weather
Setting the time
(Before using the oven, the time must be set).
1. After the oven has been electrically switched on, touch the clock
symbol
or the "+/-" symbol.
2. Tap the clock symbol again
using the slider or the "+/-" symbol.
3. Touch the clock symbol
NOTE: The clock has a 24-hour display.
1 h
and then you can set the time in hours using the slider
to finalise the setting.
.
Once the oven has cooled down:
1. Clean the smooth surfaces and the door with
soapy water and a tea towel.
2. Dry all surfaces
3. Install the side grilles
to adjust the time in minutes
17
EN
PHP-864
Publicidad
