Publicidad
Idiomas disponibles
Idiomas disponibles
13
Special parameters for HIGH SPEED series
applications.
conventional system, and allows independent management of speed, acceleration, deceleration and
the safety devices used in the system.
Note: As the mechanics of the gate is unknown, to guarantee the maximum safety of the installation, we
recommended to use sensitive edges.
The additional parameters for enabling High Speed technology are indicated as follows.
Setting deceleration during opening
Setting deceleration during closing
01= the gate decelerates near the mechanical stops ... 05= the gate decelerates long before the mechanical
stops.
Setting start acceleration during opening
Setting start acceleration during closing
01= the gate accelerates rapidly at start of manoeuvre ... 05= the gate accelerates slowly and progressively at
start of manoeuvre.
Setting opening speed
N.B.:
Setting closure speed
N.B.:
01= 6 m/min ... 10= maximum speed.
N.B.: to set the constant speed deceleration space, see parameters
74
and
on Chapter 12.
Publicidad
