Publicidad
Idiomas disponibles
Idiomas disponibles
20
Start-up
the manufacturer's declaration of conformity for all connected devices, the instructions manual of each device and
/ or accessory and the system's maintenance plan.
Apply a plate indicating the automation system data on the motorised door or gate, the name of the person in
Draw up and provide the end user with the declaration of conformity, instructions and warnings for use and the
maintenance plan.
21
Maintenance
Perform scheduled maintenance every 6 months.
If the unit contains dirt, moisture, insects or other foreign matter, disconnect from mains power and clean the
board and the housing.
Repeat the initial installation test procedure after cleaning.
If any corrosion is found on the printed circuit board, evaluate if it is necessary to replace the board itself.
22
Disposal
removing the product correctly and safely. This product consists of numerous different materials. Some
or waste management facilities indicated by local legislation applicable for this category of product.
Do not dispose of this product as domestic refuse. Observe local legislation for differentiated refuse
collection, or hand the product over to the vendor when purchasing an equivalent new product.
Warning! Some parts of this product may contain substances that are harmful to the environment or dangerous
23
Additional information and contact details
ROGER TECHNOLOGY is the exclusive proprietor holder of all rights regarding this publication.
scanning or any alterations to this document are prohibited without express prior authorised from by ROGER
TECHNOLOGY.
The digital version of this documentation (in PDF format) and all future revisions are available from the reserved
area of our website www.rogertechnology.com/B2B, in the section 'Self Service'.
ROGER TECHNOLOGY CUSTOMER SERVICE:
80
Publicidad
