Braun Aesculap Acculan 4 Instrucciones De Manejo/Descripción Técnica página 19

10. Technical Service
Danger to life of patients and users if the product
malfunctions and/or protective measures fail or are
not used!
WARNING
►
Do not perform any servicing or maintenance
work under any circumstances while the product
is being used on a patient.
►
Do not modify the product.
Modifications carried out on medical technical equipment may result in
loss of guarantee/warranty rights and forfeiture of applicable licenses.
►
For service and repairs, please contact your national B. Braun/Aesculap
agency.
Service addresses
Aesculap Technischer Service
Am Aesculap-Platz
78532 Tuttlingen / Germany
Phone: +49 (7461) 95 -1601
Fax: +49 (7461) 14 -939
E-Mail: ats@aesculap.de
Or in the US:
Aesculap Inc.
Attn. Aesculap Technical Services
615 Lambert Pointe Drive
Hazelwood
MO, 63042 USA
Aesculap Repair Hotline
Phone: +1 (800) 214 -3392
Fax: +1 (314) 895 -4420
Other service addresses can be obtained from the address indicated above.
11. Accessories/Spare parts
Art. no. Designation
GB257R ECCOS sieve basket with fixation for GA344
GB262R ECCOS sieve basket with fixation for GA844
GB600 STERILIT Power Systems oil spray
GB600880 Oil spray adapter for GA344/GA844
TA011944 Cleaning brush
GB715R ECCOS holder single
GB716R ECCOS holder triple
GA031R Key for large Jacobs chuck
Art. no. Designation
GA062R Chuck key for small three-jaw chuck
TA014552 Instructions for use, attachments for small drill GA344
and drill GA844 (for ring binder)
TA014553 Instructions for use, attachments for small drill GA344
and drill GA844 (flyer)
12. Technical data
12.1 Classification acc. to Directive 93/42/EEC
Art. no. Designation
GB870R Medullary reaming attachment, large Jacobs
chuck
GB871R Medullary reaming attachment AO large
GB872R Medullary reaming attachment
Hudson/Zimmer
GB878R Drill attachment for Synthes 511.300
GB881R Drill attachment large Jacobs chuck
GB882R Drill attachment small Jacobs chuck
GB884R Drill attachment AO small
GB886R Drill attachment Aesculap hexagon
GB887R Drill attachment dental shaft
GB891R Sagittal saw attachment
GB892R Reciprocating Saw attachment
GB894R Kirschner wire attachment
12.2 Performance data, information about standards
Rotational direction Right and left rotation, oscillation
Conforming to stan- IEC/DIN EN 60601-1
dard
The product was subject to 500 preparation cycles as a test by the manu-
facturer and has passed.
The performance data for the individual attachments can be found in the
table below.
Class
IIa
17