Seca 604 Instrucciones De Uso página 111

10.3 Sterilizing
11 FUNCTION CHECK
12 TROUBLESHOOTING
► Comply with the intervals, see table:
Interval
and
Before af-
• Weighing platform
ter each mea-
• Handrail (if present)
surement
As required • Display
The device must not be sterilized.
► Perform a function check before each use.
A complete function check includes:
• A visual inspection for mechanical damage
• A test of the alignment of the device
• A visual and function check of the display elements
• A function check of all the controls shown in the section entitled "Overview"
• A function check of the optional accessories
If you find faults or deviations during the function check, first try to remedy the
fault with the aid of the "Troubleshooting" section in this document.
CAUTION!
Personal injury
If you find faults or deviations during the function check which you are
unable to remedy with the aid of the "Troubleshooting" section in this
document, you must not use the device.
► Have the device repaired by seca Service or an authorized service
partner.
► Follow the section entitled "Servicing" in this document.
CAUTION!
Faulty measurement
► Keep the scale clean, in particular the transitions, and check it reg-
ularly.
► To prevent faulty measurements, remove any small objects on and
under the weighing platform.
If faults occur when operating the device, first attempt to remedy them yourself
using the following tables. If the fault persists, contact seca Service or an autho-
rized service partner.
With some faults, an error code appears on the display. Please let seca Service
have the error code when you contact them.
Component
Function check • 111
English