Publicidad
Idiomas disponibles
Idiomas disponibles
9.2
Measuring
Activating Autohold function
Setting the hold value
Device mode
Basic
Advanced
Expert
Service
If you activate the
Autohold
Hold
function manually for each individual measurement.
On devices with a measuring rod, the setting also applies to the display of
height.
NOTE
This function is activated at the factory on some models. The function
can be deactivated.
1. Press the
key.
ð The
menu is displayed.
Settings
2. Press the
or
key until the
3. Select the desired setting:
–
Function activated
–
Function deactivated
1. To exit the menu, press the
Device mode
Basic
Advanced
Expert
Function available
function, it is no longer necessary to activate the
menu item is displayed.
Autohold
key.
Available
Configuration (ID display) • 93
English
–
•
•
•
–
•
•
Publicidad
