Publicidad
Idiomas disponibles
Idiomas disponibles
7.3
Setting the standby time (AOFF)
76 • seca 604, seca 495/495 r/496, seca 404/405, seca 446/448, seca 442, seca 438, seca 476
2. Select the
menu item.
UnIt
3. Confirm your selection.
ð The current setting is displayed.
4. Select the units for weight and height:
– meters/centimeters (
– inch (
) pounds (
''
1. Confirm your selection.
ð The setting is adopted.
ð The menu closes.
The
function is only active in battery mode, not with power supply opera-
AOFF
tion.
If you have set a standby time, the device remains on standby for that time. If
there is no input or no load is put on the weighing platform during the standby
time, the device switches off automatically. Measuring results will be discarded.
You can adjust standby time as follows:
Function
Factory setting
Minimum standby time
Maximum standby time
Setting step
1. Press the
key for approx. 4 seconds.
ð The menu is displayed.
2. Select the
menu item.
AOFF
3. Confirm your selection.
ð The current setting is displayed.
4. Select the desired setting:
–
On
–
OFF
If you selected
OFF
:
1. Confirm your selection.
ð The setting is adopted.
ð The menu closes.
If you selected
On
:
1. Select the desired time.
2. Confirm your selection.
ð The time currently set is displayed (in this case: 30 seconds).
cm
) and kilograms/grams (
)
lbS
Off
30 seconds
1800 seconds (30 minutes)
30 seconds
kg
)
Setting
Publicidad
