Seca 604 Instrucciones De Uso página 77

7.4 Activating beeps (bEEP)
7.5 Factory settings
Overview of factory settings
Restoring factory settings
You can set whether an acoustic signal is heard with the
1. Press the key for approx. 4 seconds.
ð The menu is displayed.
2. From the menu, select the
3. Confirm your selection.
ð The current setting is displayed.
1. Select the desired setting:
– On
–
OFF
1. Confirm your selection.
ð The setting is adopted.
ð The menu closes.
Function
Autoclear (CLEAr)
Display (Lcd): Brightness (bri)
Display (Lcd): Duration (dur)
Acoustic signal (bEEP)
Attenuation (FIL)
Autohold (AHOLD)
AutoOFF (AOFF)
Unit
Height for BMI
1. Press the key for approx. 4 seconds.
ð The menu is displayed.
2. From the menu, select the
3. Confirm your selection.
ð The menu closes.
4. Switch off the scale.
ð Factory settings are restored and are available when the scale is
switched on.
menu item.
bEEP
Factory setting
2
50
Short
Off
0
On
Off
kg/cm
170 cm
menu item.
rESEt
Configuration (basic display) • 77
English
function.
Autohold