Publicidad
Idiomas disponibles
Idiomas disponibles
Switching the device off and on
Interrupting and restoring the power supply (power supply operation)
12.6
Restarting the device (seca 496)
Switching off the device
► Press the ON/OFF button (press and hold).
ð The device switches off.
Switching on the device
CAUTION!
Faulty measurement
► Before switching on the scale, check that it has no load.
► Press the ON/OFF button on the display.
ð All elements of the display appear briefly on the display, followed by
ð The scale is operational when
If restarting using the display is unsuccessful, you can briefly interrupt the power
supply to the device:
1. Make sure that there is no load on the weighing platform.
2. Disconnect the power supply unit from the power supply socket.
3. Wait about a minute.
1. Plug the power supply unit back into the socket.
ð The device and display switch on automatically.
ð The device is ready for operation.
In individual cases (e.g. following implausible input) it may be necessary to
restart the device. To do so, you can use the
switch the device off and back on again or interrupt the power supply and then
restore it.
0.00
appears on the display.
ca. 60 sec.
function in the menu or
Restart
Troubleshooting • 117
English
SECA
.
Publicidad
