Publicidad
Idiomas disponibles
Idiomas disponibles
Permanently store additional weight (Pre-Tare)
c) Wait until the message
played.
d) Remove the additional weight from the weighing platform.
NOTE
The maximum weight which can be displayed is reduced by the
weight of the objects which have been tared.
Device mode
Basic
Advanced
Expert
Service
The
Pre-tare
function can be used to save an additional weight permanently and
subtract it from a measured result automatically, e.g. a flat-rate figure for shoes
and clothing.
Activate
Pre-tare
function
1. Remove the weight from the weighing platform.
2. Press the
key.
PT
3. Enter the value.
4. Confirm the value with the
ð The set additional weight (here: 1.5 kg) is displayed with a minus sign in
front.
ð The messages
NET
goes off and the additional weight is dis-
NET
Function available
ke.y
and
are displayed.
PT
Operation with ID display • 85
English
–
•
•
•
Publicidad
