Publicidad
Idiomas disponibles
Idiomas disponibles
Permanently displaying the weight (Hold)
1. Press the
key.
ð The last weight value measured is displayed:
2. To close the display, press the
Device mode
Basic
Advanced
Expert
Service
When the
Hold
function is activated, weight continues to be displayed after the
weight has been removed from the scale. This enables you to attend to the pa-
tient before recording the weight.
✓
There is no load on the scale.
1. Ask the patient to step onto the scale.
2. Press the
Hold
key.
3. Wait until the weight has stopped flashing.
ð The message
Hold
1. To deactivate the function, press the
ð The
message is no longer displayed.
Hold
key.
Function available
appears.
key.
Hold
Operation with ID display • 83
English
–
•
•
•
Publicidad
