Descargar Imprimir esta página

Operating The Devices; 4�1 Inserting The Battery; 4�2 Removing The Battery; 4�3 Querying The Battery Status - Lukas E2 Manual De Instrucciones

Ocultar thumbs Ver también para E2:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46

4. OPERATING THE DEVICES

4.1 Inserting the battery
Push the battery straight into the battery slot until it locks in place (Figure A)�
4.2 Removing the battery
Release the lock and remove the battery (Figure B)�
4.3 Querying the battery status
Press the query button on the battery (Figure M)�
4.4 Switching on and off
Actuate the main switch to switch the device on an off (Figure I)� The device is
ready to operate when the main switch and workspace are illuminated�
4.5 Actuating the star grip valve
The working action is triggered by turning the star grip valve (Figure C)�
Every rescue device has a deadman function� When the star grip is released,
Every rescue device has a deadman function� When the star grip is released,
it returns to the center/neutral position automatically� This ensures the load is
it returns to the center/neutral position automatically� This ensures the load is
retained�
retained�
4.5.1 Cutting
Turn the star grip valve in the cutting direction (Figure D)�
Position the cutter as perpendicular as possible to the object to be cut (Figure E)�
Cut close to the pivot point of the blade� (Figure F)�
4.5.2 Spreading
Turn the star grip valve in the spreading direction (Figure G)�
Open a small gap at the start, then insert the spreader tips as far into the gap as
possible� Do not spread with the aluminum arms! (Figure H�)
4.5.3 Pulling
Secure the traction device in the Attachment / Bolt hole (6)� Actuate the star grip
valve in the closing direction (Figure D)�
4.5.4 Squeezing
Only squeeze in the squeezing area and with the squeezing plates of the spread-
er arms (Figure J)� Actuate the star grip valve in the closing direction (Figure D)�
4.5.5 Peeling
Special peeling tips are needed for peeling (Figure K)� Actuate the star grip valve
in the opening direction (Figure G)�
4.5.6 Pushing
Place the rescue ram between the object to be pushed and actuate the star grip
valve in the extending direction (Figure L)�
de
de
en
en
fr
es
pt
it
nl
da
sv
fi
el
pl
cs
sk
hu
ro
bg
sl
hr
et
lv
lt
ga
mt
zh
ko
ja
ar
23

Publicidad

loading