Boston Scientific Precision SC-1110 Serie Manual De Uso página 43

1. Area Button 4. Program Button
2. Up/Activate 5. Stimulation On/Off
3. Down/Save
Stimulation On/Off
Press the stimulation on/off button
time to turn the Stimulator on or off.
Signal Strength
The Remote Control indicates the
communication signal strength between itself
and the Stimulator in the upper right corner of
the display.
Rechargeable Stimulator System
For BEST communication, your Remote
Control should face the Stimulator.
• If there are no signal bars,
communication may still be achieved
at a very weak level. Move the
Remote Control closer to the
Stimulator and/or reorient its position
to improve communication.
at any
!
• If there are 1 or 2 signal bars, there is
adequate communication between the
Remote Control and the Stimulator.
• If there are 3 or 4 signal bars, the
Remote Control is achieving optimal
communication with the Stimulator.
• If communication is unsuccessful,
the Remote Control will display the
"Searching" message. The Remote
Control will then start continuously
looking for a signal. Either reorient
the Remote Control so that it faces
the Stimulator (see picture above),
move the Remote Control closer to
the Stimulator, or move away from
potential sources of interference.
To cancel searching press and hold
the Area Button .
"
Clinician Manual
9055959-008 Rev A 41 of 327