Boston Scientific Precision SC-1110 Serie Manual De Uso página 45

2. From the Program selection screen, press
P
the button to highlight the next program
number. Press the
"
previous program number. Pressing the
P
button from program 4 or the
from program 1 returns to the Level
screen.
3. Highlight the desired program and press
p to activate the program.
Modifying and Saving Programs
If the stimulation amplitude, pulse width, or
rate (see "Additional Area Options" on page
44) have been changed, the new settings
can be saved by following the instructions
below.
P
1. Press once to access the Program
selection screen, and then press
needed to highlight the desired program.
button to select the
button
"
P
as
Rechargeable Stimulator System
Note: Typically, patients will want to highlight
the currently running program.
This program is underlined (__).
Highlighting the underlined program
will save the new settings to the
currently running program.
2. To save/store changes, select the
appropriate program number and press
q. A confirmation screen will appear.
P
3. Press to confirm and overwrite, or
press the button to cancel the operation.
"
Restoring Programs:
The original clinic programs can be restored
by following the instructions below.
P
1. Press and hold for approximately 3
seconds to access the Restore screen.
Program 1 will be highlighted.
9055959-008 Rev A 43 of 327
Clinician Manual