Parker AC30 Serie Manual Del Producto página 380

D-88
Parameter Reference
Parameter Name No.
1794
Soft Key 2 Mode
Configures the use of Soft Key 2 when the GKP is being used to navigate through menus or parameters. When the GKP is being used
to edit a parameter, or is showing the Welcome page the use of Soft Key 2 is pre-defined, as detailed in section 7.
•
LOCAL / REMOTE:
FALSE this feature is disabled.
•
FORWARD / REVERSE: The key may be used to change the direction of rotation of the drive. The icon shown above the icon
indicates the direction that will be selected on pressing the key. This setting only applies in Local sequencing mode and when 1255
Local Dir Key Active is TRUE.
•
CUSTOM:
present state of this parameter.
1795
Soft Key 2 Value
A parameter that is driven by Soft Key 2 when 1794 Soft Key 2 Mode is set to CUSTOM. This may be used within the configuration to
allow keypad driven functionality.
Path
Parameters::Keypad::Graphical Keypad
The key may be used to change the sequencing mode of the drive. When 1253 Local/Rem Key Active is
The key may be used to toggle 1795 Soft Key 2 Value. The icon shown above the soft key indicates the
Parameters::Keypad::Graphical Keypad
Default Range
0 0:LOCAL / REMOTE
1:FORWARD / REVERSE
2:CUSTOM
FALSE
Units Writable
ALWAYS
ALWAYS
AC30 series Variable Speed Drive