Parker AC30 Serie Manual Del Producto página 391

Parameter Name No.
Digin Value 0005
Presents all the digital inputs to the drive as a 16-bit word. The bits within the word may be accessed individually, or the entire word
may be accessed as a group.
Bit Signal name
0 Digital Input 01
1 Digital Input 02
2 Digital Input 03
3 Digital Input 04
4 Digital Input 05
5 Digital Input 06
6 Digital Input 07
7 STO Inactive
8 Digital Input 11
9 Digital Input 12
10 Digital Input 13
11 Digital Input 14
12 Run Key
13 Not Stop Key
14 Stop Key
* If the GKP is not fitted then both "Not Stop Key" and "Stop Key" will be 0. This condition may be used to detect a disconnected GKP.
AC30 series Variable Speed Drive
Path
Monitor::Inputs and Outputs
Parameters::Inputs And Outputs::IO
Values
Terminal Comment
X13.2
X13.3
X13.4
X12.1 Common terminal with digital output 1
X12.2 Common terminal with digital output 2
X12.3 Common terminal with digital output 3
X12.4 Common terminal with digital output 4
X10
X20.1 GPIO option
X20.2 GPIO option
X20.3 GPIO option
X20.4 GPIO option
- GKP Run key pressed*
- GKP Stop key not pressed*
- GKP Stop key pressed*
Parameter Reference
Default Range
0:Digin 01
1:Digin 02
2:Digin 03
3:Digin 04
4:Digin 05
5:Digin 06
6:Digin 07
7:STO Inactive
8:Digin 11
9:Digin 12
10:Digin 13
11:Digin 14
12:Run Key
13:Not Stop Key
14:Stop Key
PNO for individual bit access
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
0016
0017
0018
0019
0020
D-99
Units Writable
NEVER