Sd Card - Parker AC30 Serie Manual Del Producto

D-166
Parameter Reference

SD Card

Parameters::Device Manager::SD Card
Details of the SD Card fitted in the Drive.
Parameter Name No.
Card State 1033
The state of the SD Card will either be:
0: NO CARD
1: INITIALISING
2: READY
3: CARD FAULT
Card Name 1034
The Volume Label read from the card. This is normally entered when formatting the card. It may be left blank.
Firmware 1038
TRUE indicates that the firmware upgrade file (firmware.30x) is present on the inserted SD Card.
Application Archive 1039
TRUE indicates that the project archive file (archive.prj) is present on the inserted SD Card and that the contents of this file matches
the loaded Project.
FALSE indicates that either the project archive file is not on the SD Card or that the archive file does not contain the archive of the
loaded Project.
Path
Parameters::Device Manager::SD Card
no card detected in slot
a card has been detected but is still preparing for use
the card inserted can be used
the card inserted is faulty and cannot be used
Parameters::Device Manager::SD Card
Parameters::Device Manager::SD Card
Parameters::Device Manager::SD Card
Default Range
0:NO CARD
1:INITIALISING
2:READY
3:CARD FAULT
Units Writable
NEVER
NEVER
NEVER
NEVER
AC30 series Variable Speed Drive