Functional Description - Parker AC30 Serie Manual Del Producto

D-178
Parameter Reference
Parameter Name No.
Monitor 1270
An array of PNOs that identifies the parameters to be shown in the Monitor menu

Functional Description

The Soft Menus group of parameters are used to populate the associated menus depending on the associated application, (Control Screen, Setup
and Monitor) or the requirements of the location, (Favourites). The contents of the Setup and Monitor menus may only be set by the application itself.
The contents of the Favourites menu may be set by writing to the parameters in the Favourites array. Alternatively parameters may be added to or
removed from the Favourites menu by use of the GKP. Navigate to the parameter of interest and hold the OK key until the attributes screen is
shown. If the parameter is not already in the Favourites menu a pressing Soft Key 2 adds the parameter to Favourites. This operation is indicated by
the icon . Similarly, to remove a parameter from Favourites, navigate to the parameter in the Favourites menu then press OK until the
parameter attributes are shown. Remove the parameter from Favourites by pressing Soft Key 2. This operation is indicated by the icon
Path
Parameters::Device Manager::Soft
Menus
Default Range Units Writable
ALWAYS
.
AC30 series Variable Speed Drive