Parker AC30 Serie Manual Del Producto página 545

AC30 Series Power Stack Product Order Code
Order example
1 Device Family
710
740
2 Voltage
4
3 Frame Size and Current Rating
D0004
D0005
D0006
D0008
D0010
D0012
E0016
E0023
F0032
F0038
F0045
G0045
G0060
G0073
H0087
H0105
H0145
J0180
J0205
J0260
K0300
K0380
K0440
Typical example: 710-4D004-BF-0S-0000 (as shown in the "Order example" above).
This shows the product is an AC30 series AC line fed Frame D drive, IP21 standard, rated at 400-480 volts supply, 1.1kW (normal duty), with
brake switch fitted, Category C2 EMC filter, no Graphical Keypad fitted, standard 3C3 conformal coating and no special options.
Note: This product code is for the power stack only. The control module must be ordered in addition to this (see previous page).
Controlador de velocidad variable de la serie AC30
1 2 3
710 - 4 D 0004
(1)
AC Power stack only (no control module)
DC Power stack only (no control module)
400 V nominal supply system (AC line)
(normal / heavy duty)
1.1 kW / 0.75 kW
1.5 kW / 1.1 kW
2.2 kW / 1.5 kW
3 kW / 2.2 kW
4 kW / 3 kW
5.5 kW / 4 kW
7.5 kW / 5.5 kW
11 kW / 7.5 kW
15 kW / 11 kW
18.5 kW / 15 kW
22 kW / 18.5 kW
22 kW / 18.5 kW
30 kW / 22 kW
37 kW / 30 kW
45 kW / 37 kW
55 kW / 45 kW
75 kW / 55 kW
90 kW / 75 kW
110 kW / 90 kW
132 kW / 110 kW
160 kW / 132 kW
200 kW / 160 kW
250 kW / 200 kW
4 5 6
- B F - 0
4 Brake Switch
N Without brake switch
B Brake switch fitted (standard)
5 EMC Filter
(2)
N
No filter fitted
E Category C3 filter fitted (standard)
F Category C2 filter fitted
6 Graphical Keypad
0 No keypad fitted
7 Environmental Coating
S
Standard 3C3 coating
E
Enhanced coating
8 Special Options
0000 No special options
(1) Frame size K products are available in AC line fed options only (710 family).
(2) 1. Only EMC filter option N is valid on DC fed stacks (740 family).
(3) 2. Only EMC filter option E is valid on Frame size K products.
(3)
3. EMC filter option F is not valid on Frame size J products.
Características técnicas
7 8
S - 0000
F-2