Device Disposal; Cleaning, Disinfecting And Maintenance - Ulthera Cellfina CM1 Instrucciones De Uso Del Sistema

Ulthera, Inc.

Device Disposal

After the procedure remove the Micro-Blade Assembly from the Motor Module and set the Motor Module and
Power Supply aside. The Anesthesia Needle Assembly and Micro-Blade Assembly should be disposed of per
standard institution or facility biohazard sharps disposal practice. Vacuum Handpiece and all other accessories
should be disposed of per standard institution or facility biohazard practice. Do not re-use the Anesthesia
Needle, Micro-Blade or Vacuum Handpiece Assemblies.
instructions below. Motor Module should be disposed of per standard institution or facility disposal practices of
electronics.

CLEANING, DISINFECTING AND MAINTENANCE


The Motor Module and Power Supply should be cleaned and disinfected before and after each procedure by
wiping the external surfaces with a quat-based (Quaternary Ammonium) germicidal wipe per institutional
standard practice for the recommended exposure time. Validation testing was performed with CaviWipes™
XL.

Never submerge or spray fluids on the Motor Module and Power Supply directly.

Periodically inspect the Motor Module and Power Supply (including cords) for visible damage. There is no
preventative maintenance and no user serviceable parts for the Cellfina
1007270IFU Rev D
®
Cellfina System
Clean and disinfect the Motor Module per the
User Manual
®
System.
23 of 214