Returned Goods Policy
Products must be returned in unopened packages with manufacturer's seals intact to be accepted for replacement or credit unless
returned due to a complaint of product defect. Determination of a product defect will be made by Integra. Products will not be accepted
for replacement if they have been in the possession of the customer for more than 90 days.
Repairs and Maintenance
Should your instruments require repair or maintenance, contact Integra for return authorization and address. Instruments returned to
Integra for repair must have a statement testifying that each instrument has been thoroughly cleaned and sterilized. Failure to supply
evidence of cleaning and disinfection will result in a cleaning charge and delayed processing of your instrument repair.
Limited Warranty
Integra Omni-Tract warrants to the Buyer that its products will be free from defects in materials and workmanship under normal use
and service in their intended surgical purposes and only when maintained in accordance with recommended maintenance procedures.
Product wear from normal use is excluded from the terms of this limited warranty. In addition to the limited warranty printed on this
page, disposable products are warranted to be in sterile condition provided the package in which the product is contained is intact in its
original sealer state and the expiration date has not been surpassed. At Integra Omni-Tract's option, any product that proves defective
in workmanship or materials during the warranty shall be repaired or replaced. All returns require a return authorization number. This
warranty is void if failure of the product has resulted from accident, abuse, misapplication, negligence, or if the product has been
damaged, repaired, or altered outside of Manufacturer's facility.
Retractor Components.................Lifetime
Retractor Blades...........................30 Days
Product Information Disclosure
INTEGRA AND ITS SUBSIDIARIES ("INTEGRA") AND MANUFACTURER EXCLUDE ALL WARRANTIES, EXCEPT INTEGRA'S APPLICABLE
STANDARD WARRANTY WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NEITHER INTEGRA NOR MANUFACTURER SHALL BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE, DIRECTLY OR INDIRECTLY ARISING FROM USE OF THIS
PRODUCT. NEITHER INTEGRA NOR MANUFACTURER ASSUME NOR AUTHORIZE ANY PERSON TO ASSUME FOR THEM ANY OTHER OR
ADDITIONAL LIABILITY OR RESPONSIBILITY IN CONNECTION WITH THESE PRODUCTS.
Symbols used on labeling
1
Manufacturer
European Authorized
EC REP
Representative
REF
Catalog number
LOT
Lot Number
Caution! See Warnings
and Precautions
1
Company responsible for a device marketed under its own name regardless of
whether "manufactured for" or "manufactured by" the company.
Manufacturer
Integra LifeSciences Corporation
4900 Charlemar Drive, Cincinnati, OH 45227 USA
800-367-8657 outside USA * 651-287-4300 USA * 651-287-4400 fax
integralife.com
Integra LifeSciences Services
EC REP
Immeuble Séquoïa 2
97 allée Alexandre Borodine
Parc Technologique de la Porte des Alpes
69800 Saint Priest – France
Tel: 33 (0) 4 37 47 59 10
Integra, the Integra logo, Miltex, EZ-Zyme and Omni-Tract are registered trademarks of Integra
LifeSciences Corporation or its subsidiaries in the United States and/or other countries.
©2020 Integra LifeSciences Corporation. All Rights Reserved. 40-9015 Rev BA 2020-11 1729679-1
Consult Instruction for Use
CAUTION: Federal (USA) law
restricts this device to sale by or
on the order of a physician
Product complies with
requirements of directive
93/42/EEC for medical devices