Maintenance Schedule - AL-KO SOLO 442 Manual De Instrucciones

Maintenance and care
the scope of delivery for checking/tightening the
screws of the appliance:
■
®
Torx angled screwdriver (24/1)
■
Screwdriver handle with plug insert for slotted
and cross-head screws (24/2)
■
Spark plug spanner with screwdriver (24/3)
1. Insert the matching tool in the screw.
2. Turn the screw clockwise with a short jerk.
Interval
Before starting work
After daily work
After every refilling
Every 100 operating hours
Every 12 months
If not functioning properly
2500043_d
the carburettor. Therefore no socket wrench has
been supplied for these regulating screws.
8.6
The following information relates to normal appli-
cation conditions. Under special conditions, such
as working for a particularly long time or in a very
dirty working area, the specified maintenance in-
tervals must be shortened accordingly.
Parts are only allowed to be renewed by genuine
spare parts.
Components
■
Complete appliance
■
Controls
■
Carburettor
■
Anti-vibration components
■
Complete appliance
■
Complete appliance
■
Controls
■
Carburettor
■
Spark plug
■
Air filters
■
Fuel filter in the tank
■
Air filters
■
Fuel filter in the tank
■
Spark plug
■
All accessible screws (ex-
cept setscrews)
■
Anti-vibration components
■
Throttle lever
■
On/Off switch
■
Silencer
NOTE Do not turn the regulating screws on

Maintenance schedule

Work to be performed
Visual inspection for condition
Functional check
Check idle setting
Check
Clean
Visual inspection for condition
Functional check
Check idle setting
Renew
Clean
Renew
Clean
Check
Adjust the electrode spacing
Check
Check
Clean or replace
Clean or replace
1)
Clean
1)
1)
37