Help In Case Of Malfunction - AL-KO SOLO 442 Manual De Instrucciones

GB
Interval
If defective
If necessary
1) This process must be carried out by your deal-
er or an authorised service workshop.

9 HELP IN CASE OF MALFUNCTION

Malfunction
Motor does not start, or only
starts with difficulty.
38
Components
■
Air filters
■
Fuel filter in the tank
■
Anti-vibration components
■
Silencer
■
Starter cable
■
collection bag
■
Safety sticker
■
Air filters
■
Fuel filter in the tank
■
Carburettor
■
Cooling air inlet
■
All accessible screws (ex-
cept setscrews)
■
Anti-vibration components
■
Canister for petrol and 2-
stroke oil
Cause
Motor start was not carried out
properly.
Spark plug is dirty, defective or
the electrode spacing is not
right.
Air filter is dirty.
Carburettor settings are not cor-
rect.
Inlet grille is open and the vacu-
um tube is not inserted.
Blower tube is not inserted.
Help in case of malfunction
Work to be performed
Renew
Renew
1)
Replace
1)
Replace
1)
Replace
Renew
Renew
Clean or replace
Renew
1)
Adjust idle setting
Clean
Retighten
Check
Clean
Remedy
see chapter 6.1 "Starting the en-
gine", page 33
see chapter 8.2 "Maintaining the
spark plug (21)", page 36
see chapter 8.1 "Cleaning/re-
placing the air filter (20)",
page 35
Contact an authorised service
workshop.
Close the inlet grille or fit the
vacuum tube (see chapter 4.3
"Assembly for vacuum opera-
tion", page 31).
Fit the blower tube (see chapter
4.1 "Assembly for blowing oper-
ation", page 30).
2500043_d