Publicidad
Idiomas disponibles
Idiomas disponibles
EN
12.
Select the Firmware screen on the EVlink Wi-Fi control panel.
13.
Disconnect the controller and disconnect the independent EVlink Wi-Fi power supply, if used, from the power source.
14.
Power up the controller.
15.
Connect the independent EVlink Wi-Fi power supply, if used, to the power source.
5.2
Description of the EVlink Wi-Fi LEDs
LED
red
(MODBUS communication
status)
green
(Wi-Fi communication status)
ON
-
connection with both the Wi-Fi
network and the cloud server
OFF
no MODBUS activity
MODBUS activity
no connection with the Wi-Fi
page 24
of 43
SLOW FLASH
RAPID FLASH
connection with the Wi-Fi
network
network, no connection with
the cloud server
-
Publicidad
