Publicidad
Idiomas disponibles
Idiomas disponibles
EN
OPERATING THE DEVICE
1
Initial switch-on
1.1
Connect the device to the power supply: a neutral system loading screen will be presented:
Once loading is complete, the device will display the mode it was in before being powered down:
- on the Home screen with no power failure message;
- carrying out a cycle with the POWER FAILURE message indicating that there had been a loss of power.
Power failure
1.2
If there is a power failure with no function in progress, when power is restored the device will return to the mode set
before the failure occurred.
If the power supply fails while a function is active, when power is restored the device will behave as follows:
- if blast chilling or blast freezing was in progress, the cycle will resume, taking into account the duration of the power
failure;
- if a conservation cycle was running, the cycle will continue using the same settings.
If the power supply has been cut off long enough to cause a clock error (RTC code), it will be necessary to reset the
date and time.
Silencing the buzzer
1.3
To silence the buzzer touch any key while it is sounding.
Publicidad
