Publicidad
Idiomas disponibles
Idiomas disponibles
EN
FUNCTIONS
4
Operating cycles
4.1
The device is capable of managing the following blast chilling and blast freezing cycles:
- temperature controlled blast chilling and conservation
- hard temperature controlled blast chilling and conservation
- time controlled blast chilling and conservation
- hard time controlled blast chilling and conservation
- temperature controlled blast freezing and conservation
- soft temperature controlled blast freezing and conservation
- time controlled blast freezing and conservation
- soft time controlled blast freezing and conservation
The blast chilling or blast freezing functions can be accessed quickly by pressing the keys
In addition to the blast chilling and blast freezing cycles, the controller is able to manage the following special cycles,
some of which are always available, while others can be enabled/disabled by parameters u1 (load managed by the K4
output) and u2 (load managed by the K5 output):
- pre-cooling
- manual defrosting
- fish sanitation (available if P3 = 1, i.e. if the needle probe is enabled)
- ice cream hardening
- thawing (available only if u1 is set to 2, i.e thawing heater)
- cabinet sterilisation (available only if u2 is set to 1, i.e UV lamp)
- needle probe heating (available only if u2 is set to 2, i.e. needle heater)
- recipes (programmes with predefined cycles)
The SPECIAL CYCLES menu is accessed by pressing the
key.
7
and
.
Publicidad
