Kärcher B 260 RI Combo Manual Del Usuario página 23

6. Switch the device off and on again to adopt the set-
ting.
Setting the language
1. Turn the info button until the "Language" menu item
appears on the display.
2. Press the Info button.
3. Turn the info button until the desired language is
highlighted.
4. Press the Info button.
Switch menu
The following functions are switched on and off via the
"Switch menu":
● Detergent dosing*
● Flashing beacon/ spotlight*
● Side brush spray nozzles*
● Spray suction
● Work lights
● Tank rinsing
The "Switch menu" is available in all program switch po-
sitions, except "OFF".
1. Press the Info button.
The "Switch menu" is displayed.
2. Press the Info button.
The list of functions available in the device is dis-
played.
3. Turn the info button until the desired function is high-
lighted.
4. Press the info button to change the switch state.
5. Turn the Info button until "Exit menu?" is displayed.
6. Press the Info button.
* Optional
Set maximum travel speed
1. Turn the info button until the "Travel speed" menu
item appears on the display.
2. Press the Info button.
3. Turn the info button until the desired maximum
speed is highlighted.
4. Press the Info button.
Factory setting
The factory settings of all parameters are restored (ex-
cept transport travel speed).
1. Turn the info button until the "Factory setting" menu
item is displayed.
2. Press the Info button.
3. Turn the Info button until "Yes" is highlighted.
4. Press the Info button.
Adjusting parameters for cleaning programs
All cleaning program parameters are retained until an-
other setting is selected or the device is switched off.
1. Set the program switch to the desired cleaning pro-
gram.
2. Press the Info button.
The first adjustable parameter is displayed.
3. Press the Info button
The adjusted value flashes.
4. Set the desired value by turning the Info button.
5. Confirm the changed setting by pressing the Info
button or wait until the set value is automatically ac-
cepted after 10 seconds.
6. Select the next parameter by turning the Info button.
7. After changing all desired parameters, turn the Info
button until the "Exit menu?" menu item is dis-
played.
8. Press the Info button.
The menu is exited.
Standard setting
Parameter changes made in the individual cleaning pro-
grams during operation are reset to the standard setting
when the device is switched off.
1. Turn the info button until the "Standard setting"
menu item appears on the display.
2. Press the Info button.
3. Turn the info button until the desired cleaning pro-
gram is highlighted.
4. Press the Info button.
5. Turn the Info button until the desired parameter is
highlighted.
6. Press the Info button.
The adjusted value flashes.
7. Set the desired value by turning the Info button.
8. Press the Info button.
Yellow Intelligent Key
The yellow Intelligent Key authorizes functions that are
required for the cleaning task.
The parameters for the various cleaning programs are
preset in the device. Individual parameters can be
changed depending on the authorization of the yellow
Intelligent Key.
The display texts for parameter setting are largely self-
explanatory.
"FACT" parameters (only available with R cleaning
head):
● "Fine Clean": Low brush speed for removing grey
film from fine stone.
● "Whisper Clean": Medium brush speed for mainte-
nance cleaning with reduced noise level.
● "Power Clean": High brush speed for polishing,
crystallizing and sweeping.
Authorisation management
● General access with the Intelligent Key
● Working speed
● Brush speed
● Suction system
● Contact pressure
● Water quantity
● Detergent dosage
● RAB/Blue Spot
● Spray suction
● Tank rinsing
1. Select the "Key menu" with the info button.
2. Confirm "access" by pressing the info button.
3. Define the other accesses and activate and confirm
them with the info button.
4. Press "Save?" with the info button to confirm and
save the settings you have made.
White intelligent key
Inserting the white Intelligent Key unlocks the device
and enables it for the use with preset parameters.
White Intelligent Keys can be used so that an Intelligent
Key with adapted parameters can be created for each
cleaning task.
The operator cannot change the parameters and they
are independent of the selection of the cleaning pro-
gramme on the program selection switch (the functions
"0", transport, vacuuming remain unchanged).
The grey Intelligent Key can be used to set the following
parameters for the white Intelligent Key:
● Travel speed
● Working speed
● Brush speed (only with R cleaning head)
● Contact pressure
● Water quantity
● RM dosing
● Suction system
● Work light
● Flashing beacon
● Detergent dosing unit ON/OFF
● Pre-sweeping unit
● Suction bar water valve
● Language
Programming the white Intelligent Key
1. Insert the grey Intelligent Key.
2. Turn the info button until the "Key menu" menu item
appears on the display.
3. Press the Info button.
4. Remove the grey Intelligent Key and insert the white
Intelligent Key to be personalized.
5. Select the menu item to be changed by turning the
info button.
6. Press the Info button.
7. Select the setting of the menu item by turning the in-
fo button.
8. Confirm the setting by pressing the menu item.
9. Select the next menu item to be changed by turning
the info button.
10. Turn the info button until the "Save?" menu item is
displayed.
11. Press the Info button.
The settings are saved.
12. Turn the info button until the "Exit menu?" menu
item is displayed.
13. Press the Info button.
Operation with the white Intelligent Key
1. Insert the white Intelligent Key.
● The "OFF", travel and vacuum functions work as
usual.
● In all other positions of the program selection switch,
the parameters programmed on the white Intelligent
Key are active. Different cleaning programmes can
no longer be selected.
Transport
DANGER
Driving on slopes
Risk of injury
Observe the maximum permissible gradient when oper-
ating the device on slopes for loading and unloading
purposes (see chapter "Technical data").
Always press the brake pedal to reduce speed.
English
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transporta-
tion.
1. With the D cleaning head installed, remove the disc
brushes from the brush head.
2. When transporting in vehicles, secure the device
against slipping and tipping over according to the
applicable guidelines.
Storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
ATTENTION
Frost
Destruction of the device through freezing water
Drain all water from the device.
Store the device in a frost-free location.
When choosing the parking space, take into account the
total weight of the device in order not to impair its stabil-
ity.
● This device may only be stored indoors.
● Fully charge the batteries before storing them for a
long period.
● Fully charge the batteries at least every month dur-
ing storage.
Care and maintenance
DANGER
Risk of injury from the device!
Risk of injury due to device inadvertently starting up.
Turn the program switch to the "0" position.
Remove the Intelligent Key prior to all work on the de-
vice.
Pull out the charger mains plug.
Unplug the battery connector.
WARNING
Risk of injury from moving elements!
The suction turbine, side brushes and filter dedusting
run on after switching off.
Do not carry out any work on the device until the com-
ponents have come to a standstill.
 Drain and dispose of the waste water and fresh wa-
ter.
Maintenance intervals
Each time after use
ATTENTION
Risk of damage!
Risk of damage to the device due to improper cleaning.
Do not spray the device with water and do not use ag-
gressive detergents.
A detailed description of the individual maintenance
work is provided in chapter Maintenance work.
 Drain the waste water.
 Check the lint filter and clean if necessary.
 Pull out, empty and clean the waste container.
 Only with R cleaning head: Remove the coarse dirt
container and empty it.
 Clean the exterior of the device using a damp cloth,
wetted with a mild washing lye.
 Check the suction lips, check for wear and replace if
necessary.
 Clean the squeegee blades, check for wear and re-
place if necessary.
 Clean the brushes, check for wear and replace if
necessary.
Note
The roller brushes are worn out if the yellow indicator
bristles are the same length as the other bristles.
 Charge the battery.
 If the charging state of the battery is below 50%,
charge the battery fully and without interruption.
 If the charging state of the battery is above 50%,
only recharge the battery if the entire operating
duration will be required when next used.
 Clean the waste water tank if heavily soiled.
Additionally for the Combo variant:
 Check the roller brush and side brushes for wear
and tear, foreign objects and any tangled pieces of
tape.
 Pull out, empty and clean the coarse dirt basket.
Weekly
 When used regularly, charge the battery fully and
without interruption at least once a week.
23