Wilo T72 Instrucciones De Instalación Y Funcionamiento página 201

4.8 Scope of delivery
4.9 Accessories
5 Transportation and storage
5.1 Delivery
5.2 Transport
Installation and operating instructions Wilo Motor T 12 ... 72 + EMU FA, Rexa SUPRA, Rexa SOLID
Transportation and storage
Examples:
Wilo-EMU FA 15.52-245E + T 17.2-4/24HEx-E3
Wilo-Rexa SUPRA-V10-736A + T 17.2-4/24HEx-E3
Wilo-Rexa SOLID-Q10-345A + T 17.2-4/24HEx-E3
D = abrasion protection 1
X = special configuration
Motor type key
Surface-cooled motor
T
Size
17
Configuration version
2
Number of poles
4
Package length in cm
24
Seal version
H
Ex-rated
Ex
IE-efficiency class (derived from IEC 60034-30)
E3
Standard pump
▪ Pump with bare cable end
▪ Installation and operating instructions
Configured pumps
▪ Pump with bare cable end
▪ Cable length as per customer request
▪ Mounted accessories, e.g. external pencil electrode, pump support foot, etc.
▪ Installation and operating instructions
▪ Suspension unit
▪ Pump support foot
▪ Special versions with Ceram coatings or special materials
▪ External pencil electrode for sealing chamber control
▪ Level control devices
▪ Fixation accessories and chains
▪ Switchgear, relays and plugs
After receiving the shipment, this must be checked immediately for defects (damage,
completeness). Defects must be noted on the freight documentation! Furthermore, de-
fects must be notified to the transport company or the manufacturer immediately on
the day of receipt of shipment. Subsequently notified defects can no longer be asser-
ted.
WARNING
Standing under suspended loads!
Never allow anyone to stand under suspended loads! Danger of (serious) injuries
caused by falling parts. Loads may not be carried over work places where people are
present!
WARNING
Head and foot injuries due to a lack of protective equipment!
Danger of (serious) injuries during work. Wear the following protective equipment:
• Safety shoes
• Safety helmet must be worn if lifting equipment are used!
en
201