Sirona ORTHOPHOS XG 5 Instrucciones De Montaje página 104

7 Mechanical conversion
7.16 Installing and connecting the wires for the new XG 3D X-ray tube assembly Converting instructions for the "ORTHOPHOS XG 5 to
42
7.16
Installing and connecting the wires for the new
XG 3D X-ray tube assembly
Installing and connecting the wires for the new XG 3D X-ray tube assembly
1. Hang the new tube assembly on the two front screws (D) of the
rotating unit and tighten them securely.
2. Insert the two rear screws (C) and tighten them firmly.
3. Plug cables L3, L5 and L6 as well as the ground cable back onto
board DX6 and reattach the cables to the rubber grommets.
4. Re-attach the cover plate (B) with the four screws (A).
Sirona Dental Systems GmbH
63 52 970 D3352
D3352.092.08.05.02 07.2012