Sirona ORTHOPHOS XG 5 Instrucciones De Montaje página 98

7 Mechanical conversion
7.13 Installing and connecting the wires for the rotation unit
A A A
B B
C
36
Converting instructions for the "ORTHOPHOS XG 5 to XG 3D upgrade kit"
7.13
Installing and connecting the wires for the rotation
unit
Installing and connecting the wires for the rotation unit
Rotation of the rotation unit
CAUTION
The unit is rotated via a motor drive.
Never turn the rotation unit manually, as this could damage the gearing.
1. Screw the rotation unit onto the ring using the three screws (A) and
washers (B) and the connector plate (C).
2. Plug cable L20 and both light barrier cables L21 (from the rotation
unit) into connectors X203 (L20), X303 (L21) and X304 (L21) on the
ring.
3. Plug cables L13 and L13a together through the connector plate (C)
and screw the plug connection tight.
Sirona Dental Systems GmbH
63 52 970 D3352
D3352.092.08.05.02 07.2012