Sirona ORTHOPHOS XG 5 Instrucciones De Montaje página 85

Sirona Dental Systems GmbH
Converting instructions for the "ORTHOPHOS XG 5 to XG 3D upgrade kit" ORTHOPHOS XG 5
B
63 52 970 D3352
D3352.092.08.05.02 07.2012
7.3
Removing the headrest and outer ring
1. NOTICE! Cable L18
Removing the headrest and outer ring
While holding the headrest firmly from below, loosen the screw (A)
and remove the headrest.
2. Pull cable L18 off connector X1 on board DX5.
A
3. Loosen the four screws (B) and remove the outer ring.
4. Keep the headrest and the outer ring in a safe place for reassembly.
C
7 Mechanical conversion
7.3 Removing the headrest and outer
23