Publicidad
Idiomas disponibles
Idiomas disponibles
Sirona Dental Systems GmbH
Converting instructions for the "ORTHOPHOS XG 5 to XG 3D upgrade kit" ORTHOPHOS XG 5
Perform a software update
Activating the service menu
E
F
G
63 52 970 D3352
D3352.092.08.05.02 07.2012
6
Activating the functionality for the Easypad
Activating the functionality for the Easypad
1. Switch the unit on.
"Automatic"
2. In
to the latest XG3D unit software version supplied, as described in the
ORTHOPHOS XG5/XG
NOTICE! At this point, do not acknowledge any error messages on
the unit or the PC (e.g. "Timeout suspected").
3. Switch the unit off.
Wait approx. 1 minute. Then switch the unit back on.
Acknowledge any error messages that appear with the R key.
1. Press and hold down Service key (D) until the patient symbol keys
light up (E-H) (approx. 2 s).
D
2. Then press the patient symbol keys in the sequence F – H – E within
the next 4 s.
H
update mode, perform an automatic software update
Plus
and XG3D
After you have entered the key combination correctly, the service
menu is displayed.
6 Activating the functionality for the Easypad
ready
Service Manual.
17
Publicidad
