4.4
Control lever
4.5
Function switch
4.6
Direction lever on steering wheel
F
Forwards travel direction
N
Neutral position (no travel direction)
R
Reverse travel direction
NORMAL
Normal performance class
ECO
ECO operation performance class
50
1 Lever for steering wheel adjustment
2 Open/close flap of the waste container
3 Raising/lowering high emptying of waste container
4 Switching the hydraulics on/off
Note
When the hydraulics are switched on, the brushes start to
rotate. They are lowered with the function switches.
1 Signal horn
2 Work lights on/off
3 Filter cleaning for dust filter
4 Water spraying unit on/off
5 Lowering/raising the side brush/scrubbing deck
6 Switch for cleaning type: sweeping or scrubbing
Upper position: Wet cleaning mode, the suction bar
lowers and the suction turbine switches on.
Central position: Brush head lifted.
Lower position: Sweeping cleaning mode, the sweep-
ing blower switches on. The suction bar remains up.
Push the lever forward to drive forwards.
Pull the lever backward to drive in reverse.
Turn the twist grip in the desired direction to set the per-
formance class.
12
-
EN