Descargar Imprimir esta página

Kärcher B 300 RI BP Manual Del Usuario página 64

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 190
9.4.1.1
Daily before starting operations
Check the battery charge level.
Empty waste container.
Empty the dirt water reservoir.
Fill fresh water tank as needed.
Check brushes for wear and damage.
9.4.1.2
Weekly
Check fluid level of battery.
(only with low-maintenance battery)
Check the pad for wear, replace if required.
9.4.1.3
Every 150 operating hours
Use the grease gun to lubricate the lubricating nipple
on the waste container.
Use the grease gun to lubricate the lubricating nipple
on the brush head excavation.
9.4.1.4
Every 200 operating hours
Check hydraulic connections for leakage and re-tighten
them if necessary.
9.4.1.5
Every 1500 operating hours
Replace the dust filter.
9.4.1.6
After wearing has taken place
Replace sealing strips.
9.4.2
Maintenance by Customer Service
Note: In order to safeguard warranty claims, all service
and maintenance work during the warranty period must be
carried out by the authorised Kärcher Customer Service in
accordance with the maintenance booklet.
9.5
Inspection and maintenance work
9.5.1
General notes on safety
DANGER
Risk to life
When carrying out repairs, remove the vehicle from the
danger zone of passing traffic and wear reflective cloth-
ing.
WARNING
Risk of personal injury or damage!
Be careful when using high-pressure cleaners for
cleaning!
Radiator fins, hydraulic hoses and valves, seals and
electric and electronic components must not be
cleaned with the high-pressure cleaner.
Risk of injury due to vehicle starting up inadvertently.
Remove the ignition key and battery plug before per-
forming cleaning work or maintenance work on the ve-
hicle.
Maintenance on the hydraulic system must only be car-
ried out by trained personnel.
WARNING
Risk of personal injury or damage!
Always apply and secure the safety support with the tilt-
ing device raised.
CAUTION
Risk of burns!
Allow the vehicle to cool down sufficiently before per-
forming any maintenance and repair work.
Do not touch hot parts of the hydraulics.
64
Check suction lip of the suction bar for wear and dam-
age.
Check/clean the water and suction system.
Check function of all operator control elements.
Check appliance for damages.
Clean the dust filter with the filter cleaning button.
Check the container lid and lubricate it.
Use the grease gun to lubricate the lubricating nipple
on the suction bar.
Use the grease gun to lubricate the lubricating nipple
on the bearing of the engine.
Check the areas around the suspension, wheels, steer-
ing and combustion engine for loose screws and re-
tighten them if necessary.
Replace brushes.
All service and maintenance work performed during
Customer Service maintenance must be carried out by
the authorised Kärcher Customer Service in accord-
ance with the inspection checklist (ICL).
Retighten hydraulic connections as needed.
26
-
EN

Publicidad

loading

Este manual también es adecuado para:

B 300 r i bp pack2.004