Kärcher B 300 RI BP Manual Del Usuario página 71

9.8.6 Cleaning sealing lips, suction bar and spray nozzles
2
9.8.7 Clean the waste container
9.8.8 Clean water filter.
1 Vacuum bar
2 Suction hose
3 Seal strip
Clean suction bar and suction hose.

Clean the side sealing strips.

Clean the spray nozzles of the side scrubbing deck and

1
roller brush.
WARNING
Risk of personal injury or damage!
Always apply and secure the safety support with the tilt-

ing device raised.
Do not use any high-pressure cleaners or water jet for

cleaning (dust filter cartridges)!
ATTENTION
Allow dust filter cartridges that have become wet to dry be-
fore resuming work!
1 Waste container
2 Flap of waste container
3 Safety support
Clean interior of waste container with compressed air

and a brush.
With stubborn contamination: Clean interior of waste

container with water and a brush, leave the waste con-
tainer open to allow it to dry out.
1 Water filter
2 Water filter casing
3 Stop cock (Open position)
Close the stop valve.

Unscrew the water filter casing.

Take out and clean or replace the water filter insert.

Open the stop cock again after installation.

33
-
EN 71