Volume And Contrast Control, Language Selection - Sirona SIROEndo Pocket Instrucciones De Uso

6 Operation
22
To load a file system from a SIROEndo Pocket memory stick:
1. Insert the SIROEndo Pocket memory stick with the file system in the
USB port at the bottom of the SIROEndo.
2. Press the "Load" key until the following message appears on the display:
Load
For your orientation, you will also find a "
play when working with the personal file assortment.
Once the file system has been loaded, the unit displays a single system con-
taining the selected files.
To select a file from the individual file selection, press
"Type " or "Type ".
Saving individual speed and torque settings
Save: Briefly pressing the "Save" key enables the user to store his/her own
personal settings for the reduction ratio, rpm and torque, which differ from the
Save
default settings located in the internal unit memory or from those stored on a
SIROEndo Pocket memory stick. An acoustic signal sounds following suc-
cessful storage.
Once they have been saved in the SIROEndo Pocket, the settings stop flash-
ing. Whenever data is saved in the SIROEndo Pocket, the previous data are
overwritten. If you press the "Mem" key longer, the data will be exported to the
SIROEndo Pocket memory stick – provided that it is plugged in.
6.3 Volume and contrast control,
Language selection
To open the menu, press and hold the "Set Up" key for > 3 sec. The following
message then appears on the display:
Set-Up
Operating Instructions SIROEndo Pocket
========================
Individual file Individual file
assortment loaded assortment loaded
========================
@
" symbol at the top right of the dis-
Motor buzzer tone Motor buzzer tone
===================
.........
Typ+/Typ-
===================
2
61 97 722 D 3526
D 3526.201.01.05.02 07.2012