Sirona SIROEndo Pocket Instrucciones De Uso página 59

4 Installing the SIROEndo Pocket
D
1
1
6
12
5. Carefully place the bottom part of the motor (C) onto the contact pins in
the micromotor (D). Note the position of the contact pins in relation to the
sockets in the coupling. Now place the bottom part of the motor onto the
micromotor and screw it tight.
C
6. Connect the plug of the micromotor (3) at the front of the
SIROEndo Pocket (1). Make sure that the groove is facing downward
(plug snaps in place when plugged in).
Moisten the O-rings of the micromotor with a little oil.
Plug the ENDO 6:1 contra-angle handpiece onto the micromotor and de-
posit the micromotor with contra-angle handpiece in its holder.
(The ENDO 6:1 contra-angle handpiece is not contained in the packaging
of the SIROEndo Pocket. It is delivered packed separately.)
3
7. Connect the mucosal electrode (6) of the apex locator to the rear socket
on the left side of the SIROEndo Pocket (1).
A short acoustic signal sounds.
8. Connect the cable of the file clamp (5) of the apex locator to the front
socket on the left side of the SIROEndo Pocket.
5
Operating Instructions SIROEndo Pocket
D 3526.201.01.05.02 07.2012
61 97 722 D 3526