[C] Platform Adjustment - Hoshizaki DBF-AS65WE-EU Manual De Instrucciones

[c] PLATFORM ADJUSTMENT

The upper and lower platform positions are adjustable to accommodate two different mug heights. The guide can also be moved
back and forth according to the mug shape.
1) The platform assembly has the components as
shown on the right.
2) Move the platform in the desired position and secure it with the screws.
The upper platform position is adjustable between the 1st and 7th levels of the mug
plate, and the lower platform position between the 4th and 12th levels. The top of
the mug must fit the mark on the back plate when positioned on the platform. (See
the table on the next page for the mug heights and platform positions.)
3) After adjusting the platform positions, fit the guide to position the bottom of the
mug. The guide with cover is for the upper platform.
4) Refit the platforms to the unit.
When adjusting the upper platform position, also adjust the bracket position according to the table on the next page.
Cover
Hook
NOTICE
7
ENGLISH
Upper Platform
Built-in
Sensor
Magnet
Lower Platform
Mark
Back
Plate
Screw
Front
Remove screws
on both sides
Shift
Guide
(2) Refit
(1) Adjust position
(3) Secure with screws
on both sides
Mug Plate
Rear